PPAP Production Part Approval Process, Production Part Approval Process
FMEA Potential Failure Mode and Effects Analysis, Potential Failure Modes and Effects Analysis
MSA Measure System Analysis, Measurement System Analysis
SPC Statistical Process Control, Statistical Process Control Auditing Audit
Capability
Capability Indices
Control Plans
Corrective Action Corrective Action
Document Documentation
Job Instruction, work instruction
Nonconformance Nonconformance
Failed Nonconformity
Unqualified per million parts Defective Parts Per Million, DPPM
Preventive Action Preventive Action
Procedures
Process Flow Diagram, Process Flow Chart
Quality Manual Quality Manual
Quality Plan Quality Plan
Quality Planning
Quality Records Quality Records
Raw Data Raw Data
Reaction Plan Reaction Plan
Rework Repair.
Rework Rework
Site Site
Subcontractors Subcontractors
Product
Quality quality
Quality requirement
Customer satisfaction
Quality management system
Quality policy
Quality objective
Quality management
Quality control
Quality assurance
Organization organization
Customer customer
Supplier supplier
Process process
Service service
Design and development:
Characteristic characteristic
Traceability
Qualified conformity
Defect defect
Correct
Concession concession
Release release
Scrap scrap
Specification specification
Inspection inspection
Test test
Verification verification
Review review
Measurement measurement
Counting Data Attributes Data
Common Cause Common Cause
Single Value Individual
Mean Mean
Random sampling Random Sampling
Extreme Range
Special Cause
Stability
Subgroup Subgroup
Measured data variables Data
Variation
Inherent variation
Total variation
Bias
Repetitive Repeatability
Reproducibility Reproducibility
Stability
Linear Linearity
Resolution Resolution
Process Change
Quality Function Deployment QFD
Process Specific Characteristics
Special Product Characteristic
Appearance Item Appearance Item
Initial Process Capability
Bill of Material Bill of Material
Design Validation Design Validation
Design Verification Design Verification
Voice of the Customer
The voice of the process Voice of the Process
Slip-On Flange is also belong to welded flange, because there is a short-necked, thereby increasing the strength of the flange to improve the pressure. It can be used in higher pressure pipelines.Materials: 20#.A105.Q235A.12Cr1MoV.16MnR.15CrMo.18-8.321.304.304L.316.316L.
Product:Slip-On Flange
Size:DN10-DN2500
Materials: 20#.A105.Q235A.12Cr1MoV.16MnR.15CrMo.18-8.321.304.304L.316.316L
Pressure: Pn2.5-Pn320,Class150-Class2500,5K-30K
Standard:ASME B16.5,ASME B16.47 ,DIN 2634,DIN 2635,DIN 2630,DIN 263,DIN 2631,DIN 2637.......
Crafts: Forging
Connection: Welding,Bolt.
Package: Wooden boxes,Wooden pallets,According to customer requirements.
Brand Name: HY
Place of Origin: China (Mainland)
Certification: ISO.UKS.SGS.BV
Application: Chemical, Water, Oil and gas, Electricity
Slip-On Flange
Slip-On Flange,Asme Slip On Flange,Weld Neck Flange ,Slip-On Pipe Flange
CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com