In the second half of 2010, the number of new products to be launched in the market: Chromatography-mass spectrometry was lower than the number of new chromatograms and mass spectrometers introduced in the first half of 2010. The introduction of new products for chromatography and mass spectrometry slowed down in the second half of the year. Among them, 2 new chromatographic products and 7 new mass spectrometer products were introduced. However, it is relatively gratifying that 4 of the 6 new mass spectrometry products launched in the second half of 2010 were domestic mass spectrometry products, and after the East-West analysis and general analysis of domestic-made quadrupole GC/MS instruments , Concentration Technology, Guangzhou Minxin have made new breakthroughs in ion trap mass spectrometry and time-of-flight mass spectrometry...
Listed in the second half of 2010, new products of the instrument category: Spectrum In the second half of 2010, a number of XRF instruments were on the market, and Thermo Fisher Scientific, Skyray, Shimadzu, and Baixue Instruments all had corresponding new products. Other new spectrophotometers include Hyundai Wright's "WFX-910 Portable Atomic Absorption Spectrometer", Ocean Optics' Nirquest512-2.2 High Resolution Micro Fiber Spectrometer, Spectra Rad Irradiance Launched by Bidtec and Konica Minolta. Spectrometer, Tianrui direct reading, atomic absorption, Raman spectroscopy, Beijing Zhuo Li Hanguang launched a large-scale thin-film solar cell quantum efficiency measurement system, etc....
New Products Listed in the Second Half of 2010: Optical Instruments Qualcomm's QuasOr EBSD electron microscopic analysis products were the first integrated electron backscatter diffraction in the industry in the second half of 2010. Microscope analysis system with energy spectrum spectrometer and spectrometer in the same software interface; Focus3D laser scanner from Farru Technology Co., Ltd. is 4 times lighter and 5 times smaller than similar products, making it the smallest in the industry. The lightest laser scanner...
New Products Listed in the Second Half of 2010: Physical Testing Classes In the second half of 2010, particle size analyzers, thermal analysis instruments, testing machines, and surface interface physical property testing instruments have all introduced new products, such as those in Jinan, Weiner, and Dandong Baxter. After the launch of a dynamic light scattering nanoparticle sizer based on photon correlation technology, Oasis of Zhuhai introduced a new nanometer particle sizer in September 2010; METTLER TOLEDO introduced a flash DSC 1 ultra-fast differential scanning calorimeter. The US TA's DISCOVERY DSC came out; after MTS acquired the new Sansi, it released the Criterion (beacon) series of high-end static testing machines for the first time globally...
New Products Listed in the Second Half of 2010: Elemental Analysis Class of Elemental Analysis Instruments Released in the Second Half of 2010 New Product: Wuxi Jin Yibo's CS-8810C High Frequency Infrared Carbon and Sulfur Analyzer, Skyray Instrument's CS-168 High-frequency infrared carbon-sulfur analyzer, NDA701 Dumas burning statutory nitrogen analyzer from Italy VELP, FOODALYT (D1000-D5000) Kjeldahl nitrogen determination system from Germany OMNILAB, trace SN cube sulfur and nitrogen analyzer from Elementar, Germany, Nanjing Fourth Analytical Instrument Co., Ltd. HJ-D computer infrared multi-element analyzer ...
New Products Listed in the Second Half of 2010: Water Quality Analysis In the second half of 2010, manufacturers of water quality analyzers such as Hach USA, BEHRINGER, and Thermo Fisher Scientific have introduced a number of new products; in addition, Shanghai Precision Scientific Instruments Co., Ltd. introduced the 718 portable multi-parameter water analyzer. Shimadzu has introduced the latest NHN-4200 ammonia nitrogen analyzer...
New Products Listed in the Second Half of 2010: Gas Detection Classes In the second half of 2010, Testo Instruments introduced the testo 340 four-component flue gas analyzer and the wet desulfurization export SO2 sampling probe; US-based VIG Corporation released a total of 10 online models Hydrocarbon analyzer and other 3 new products; Qingdao High-tech Industrial Park Leibo Electronic Instrument Factory launched a 3040 smoke comprehensive measurement system, etc.
New Products Listed in the Second Half of 2010: Common Lab Equipment Lab Equipment includes cleaning/disinfection equipment, sample preparation/digestion equipment, separation/extraction equipment, purification equipment, crushing equipment, etc.; The commonly used equipment manufacturers have released a number of instruments through the instrument information network. This article classifies these products...
Alloy steel refers to steel with high strength and good chemical stability at high temperature. It includes two types of anti oxidation steel (or high temperature resistant steel) and hot steel. Anti oxidation steel generally requires good chemical stability, but the capability is limited. High temperature strength and the corresponding oxidation resistance of heat and strong steel are required. Heat-resistance steel is often used in the manufacture of boiler, steam turbine, power machinery, industrial furnace and aviation, petrochemical and other industrial sectors in the work of the high temperature parts. In addition to the requirements of high temperature strength and high temperature oxidation corrosion, sufficient toughness, good shaping and welding are also required according to the different use, as well as a certain organizational stability. In addition, some new low chromium nickel oxidation are also developed .
Heat-Resistance Steel ,Heat-Resistant Material Handling Steel,Heat-Resistant Steel Tube,Heat-Resistant Black Round Steel Pipe
Jiangsu nickel alloy Co.,Ltd , https://www.xhalloy.com