At the invitation of President Niñsto of the Republic of Finland, Chinese President Xi Jinping paid a state visit to Finland from April 4 to April 6, bringing the cooperation between China and Finland to a new level. The cooperation between China and Finland in clean technologies is particularly noteworthy. It is estimated that in the next 10 years, Finland's exports to China in this area will achieve an average annual growth rate of more than 20%. The industry believes that at present the scale of clean technology transfer between China and Finland is not large, but it is expected that President Xi Jinping's visit will bring the growth of Sino-Finnish clean technology transfer to a new stage.
Sino-Finnish cooperation in clean technology is increasingly strengthening the five major areas is expected to take the lead in flowering In the Sino-Finnish economic and trade exchanges, the Sino-Finnish clean technology cooperation is particularly noteworthy.
Finland is known as the "pure country" reputation, is a well-deserved clean powerhouse. More than one-third of Finland's government R & D funds are invested in clean technologies, with Finland accounting for 0.4% of global GDP and clean technologies accounting for 1% of the global cleantech market.
The Finnish Cleantech Council links Finland's cleantech expertise with global needs. Finnish exports of clean technologies have tripled in value since the early 1990s, accounting for about 7% of their total exports, well above the level of any OECD country.
Since 2010, China has become one of Finland's top five exporters of clean technologies.
To this end, Sautkhuyenning, executive director of the Finnish Cleantech Committee, publicly stated in mid-last year that the cooperation between China and Finland in the field of clean technologies is developing rapidly and it is estimated that Finland's exports to China in this area will be averaged over the next 10 years Over 20% growth each year.
Xu Rong, founder and president of Yu Ink, which focuses on the international clean technology transfer business, said: "At present, the scale of clean technology transfer between China and Finland is not large. However, it is expected that President Xi Jinping's visit will drive the growth of Sino-Finnish clean technology transfer to reach A new stage. "
Soil repair technology transfer will grow faster
According to statistics, more than 60% of the Finnish enterprises currently provide products, technologies and services that can be included in the "clean technology" category. Finland is active in more than 2000 clean technology companies, the industry average annual growth rate of more than 15%.
Among them, Finland ranks among the world leaders in five key areas: water treatment, renewable energy, energy efficiency solutions, waste management and treatment, and air pollution control.
In the area of ​​water treatment, Finland, known as the "country of thousands of lakes," has a total population of about 188,000 lakes and lakes all over the country. Since 1940, Finland has been the forerunner of global pollution prevention in the water resources system. At present, water conservation , Closed industrial water cycle and efficient sewage treatment and other fields have world-class technology, technology and consulting services.
"There is a platform for water resources exchange between China and Europe and this year Finland is a rotating nation. We are organizing the exchange of Chinese enterprises in the past, and now there are already more than 60 enterprises applying for it." China Industry Energy Conservation and Cleaner Production Association Water Saving and Water Treatment Branch Secretary-General Guo Youzhi introduced.
In terms of renewable energy, Finland is one of the EU countries with the highest renewable energy utilization rate. At present, Finland's renewable energy accounts for 32% of its overall energy consumption.
According to its government plan, renewable energy sources, including bioenergy, hydro power, wind energy, geothermal energy and solar energy, account for a quarter of Finland's total energy consumption and more than a third of electricity production. Finland has set a target of raising the share of renewable energy in total energy consumption from its current level to 38% by 2020 and 20% of renewable energy in transportation fuels.
Bioenergy accounts for the largest share of renewable energy use in Finland at present, accounting for nearly 90% of renewable energy. Among them, the "wood-based fuel" based on Finland's rich forest resources and developed forest industries is particularly prominent. In addition to wood-based fuels, Finland is also at the forefront of the world in the development and utilization of other biofuels.
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flowchat of Continuous Waste Tyre Pyrolysis Plant
Advantages of Continuous Waste Tyre Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Tyre Pyrolysis Plant
|
NO. |
ITEM |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Small pieces of Waste tyre,rubber, waste plastic≤5cm |
|
2 |
Operating Mode |
Fully Continuous Operation |
|
3 |
Structure |
Horizontal Type Revolve |
|
4 |
Loading and discharging |
Fully Automatic Feeding and Discharging under High Temperature at Same Time |
|
5 |
Capacity(24h) |
8-20Mt |
|
6 |
Work Pressure |
Slightly Negative Pressure |
|
7 |
Oil Yield of tyres |
40%-45% |
|
8 |
Reactor Rotational Speed |
1R/M |
|
9 |
Installation Power |
110kw |
|
10 |
Cooling Method |
Cycle water |
|
11 |
Type of Drive |
Sprocket Wheel |
|
12 |
Heating Method |
Hot Air |
|
13 |
Noise dB(A) |
≤85 |
|
14 |
Main Reactor Weight (MT) |
About 20Mt |
|
15 |
Total Weight(MT) |
About 45Mt |
|
16 |
Installation Space Required |
60m*20m |
|
17 |
Manpower |
2/shift |
|
18 |
Shipment |
5*40HC |
|
19 |
Delivery time |
≤70Days |
Continuous Waste Tyre Pyrolysis Plant
Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com