LC Roots pump correct installation precautions and features

LC high-viscosity Roots pump, sub-belt drive and gear reducer drive two forms. The LC Roots pump is suitable for conveying crude oil, petroleum, sugar syrup, and yeast light alkaline liquids with temperatures up to 140°C. This pump has: low High speed, high efficiency, small volume, large flow rate, low power consumption, strong self-priming ability, no need of oil priming, easy to use, etc. The structure is reasonable and easy to use. Roots oil pump can be widely used to transport petroleum and petroleum products (gasoline Exchangeable copper pump blades) and factory transport of various oils and liquids such as crude oil, paint, diesel oil, heavy oil, lubricating oil, glass glue, grease acid, toothpaste and light alkaline (soap processing) liquids; food processing can be transported Various liquids, such as soy milk, yeast, sugar syrup, etc. The loading and unloading of various tank trucks and oil tankers are fast, efficient, and easy to use.
Roots Oil Pump Installation Precautions 1. The installation height of the Roots pump should be such that it does not exceed the vacuum height allowed by the pump.
2. The pipeline shall have pipe racks, the pump shall not be allowed to bear the load of pipelines. 3. Vacuum gauges and pressure gauges shall be installed at the inlet and outlet of the pump respectively, so that the working condition of the pump can be observed in time. 4. To make the pump and the motor work safely, The overload protection device should be installed in the electrical system 5. The pipe elbow should be reduced as much as possible, and the larger the elbow radius the better so as not to cause vibration. 6. Filters should be installed on the inlet line of the Roots pump to prevent large particles from entering the pump. Cavity, damaged oil pump