With the completion of the lifting of the prefabricated roof panels, the main structure of the sludge dewatering technical upgrading project of the Nanjing Public Water Co., Ltd. Chengdong Sewage Treatment Plant was successfully completed, and the entire project is expected to be completed and put into operation by the end of June.
Chengdong Sewage Treatment Plant sludge dewatering equipment technical transformation and sludge emergency treatment project is a deep sludge dewatering technical transformation project. The project is located in the existing Chengcheng East Sewage Treatment Plant in Gaoqiao Village, Baixia District. The construction area is approximately 1600 square meters. The project includes a deep dewatering plant and sludge storage yard, thickening pond, conditioning pond, and existing sludge storage. Warehouses and some pipelines were modified and relocated. After the Chengdong Sewage Treatment Plant's sludge dewatering equipment technical upgrading project is put into use, the process of concentration, conditioning, pressure filtration and dehydration is used for deep dewatering, which can reduce the moisture content of the sludge to below 60%, after 2-3 days of stacking. After turning over, the moisture content of the factory sludge is reduced to less than 50%, then transported to brick factories, power plants, etc. for incineration, and burned separately in the future by constructing a specialized sludge incineration facility.
It is reported that this project is to realize the stabilization, harmlessness, reduction, and recycling measures of sludge disposal under the premise of giving priority to ecological benefits and prioritizing environmental benefits. It will avoid the secondary pollution of sludge to the environment and effectively improve it. city ​​environment.
Pipe Cutting Machine mainly fit for metal pipe cutting requirements.
1. 3 axis pipe Plasma Cutting Machine mainly be used for round pipe cutting.
2. 4 aixs pipe cutting machine mainly be used for square pipe continuous cutting special shape.
3. Also as multifunction cutting machine use together with plasma cutting table.
4. Accept OEM for any pipe cutting diameter and working length. ( Normally from 100x100mm up to 600x600mm dia. )
5. Accept any materials cutting: Iron plate, Stainless steel plate, Titanium plate, Galvanized sheet, Aluminum plate, High speed steel, etc
Pipe Cutting Machine,Pipe Cutter,Automatic Pipe Cutting Machine,Customized Pipe Cutting Machine
Jinan Huaxia Machinery Equipment CO.,Ltd , https://www.cnformingmachine.com