Three tips for SKF bearing anti-rust oil

The SKF bearing anti-rust oil coating is a certain skill, properly used to prevent the SKF bearing rust, improper use of the oil can not play a role in lubrication may cause bearing rust, more likely to hinder the normal use of SKF bearings. So how do you use anti-rust oil for SKF bearings? Here are three ways to share.

First, brushing

When brushing, pay attention to evenly smear on the surface of SKF bearings, do not produce a stack brush, but also pay attention to prevent leakage.

Second, spray method

Some large bearings are not suitable for oiling by immersion. They are usually sprayed with filtered compressed air at a pressure of about 0.7 Mpa in an air-cleaning place. The spray method is applicable to solvent-reduced rust preventive oils or thin layer rust preventive oils. This method must use perfect fire protection and labor protection measures.

Third, the soaking method

Some small SKF bearings are immersed in rust-proof grease, and the oil film thickness can be achieved by controlling the temperature or viscosity of the rust-proof grease. Attach a layer of anti-rust grease to the surface.

Using the above three methods not only can prevent the rust of the SKF bearing, but also ensure that the anti-rust oil can play its role as a lubricant.